3500-53 133388-01 Features and Functions

Highly reliable and responsive: It is a highly reliable and responsive redundant tachometer system specifically designed for mechanical overspeed protection.

Compliant with industry standards: The system complies with the American Petroleum Institute's standards 670 and 612 for overspeed protection.

Programmability: This system is a PLC programmable control system that allows users to customize and configure according to their needs.

Specification 3500-53 133388-01

Input signal: Each overspeed detection module receives a signal from an eddy current sensor or magnetic sensor, with an input signal range of+10.0V to -24.0V.

Input impedance: 20k Ω.

Power consumption: Typically 8.0W.

Supported sensors: Suitable for Bentley 3300 8mm eddy current sensors, 3300 16mm high-temperature eddy current sensors (HTPS), 7200 5mm, 8mm, 11mm, and 14mm eddy current sensors, 3300 RAM eddy current sensors, or magnetic sensors.

Alarm and protection

Alarm set points: 3500-53 133388-01 can be set below or above the alarm level, as well as dangerous (overspeed) set points for speed. All alarm setpoints are set by software configuration.

Alarm time delay: When the frequency is above 300Hz, the alarm time delay is less than 30ms.

Overspeed detection module: provides proportional overspeed speed values, which can be used to monitor the measurement of mechanical speed by the monitor.

system configuration

Voting System: The 3500-53 133388-01 module can be used to form a 2 out of 2 or 3 out of 2 (recommended) voting system.

Power requirements: The 3500 rack equipped with an overspeed detection system requires redundant power supply.

Module installation: It can be installed in any slot (2-15) on the right side of the framework interface module, but the three module groups must be installed adjacent.

Purpose and Application

Protecting the machine: 3500-53 133388-01 compares the current machine speed value with the alarm value in the configuration continuously, and drives the alarm system to achieve the purpose of protecting the machine.

Provide information: Provide speed information for key equipment to operators and maintenance personnel.

Configuration and Configuration

The 3500 rack configuration software can be used to configure each channel of 3500-53 133388-01, enabling it to have various functions such as radial vibration, axial displacement, differential expansion, shaft eccentricity, etc.

If the model you need is not yet released, please contact me to help you check.

We handle every order with the utmost enthusiasm and dedication, and offer the greatest discounts.

Please raise your question! Welcome to consult!

Mail :elora16811@gmail.com
Phone/Wechat/Whatsapp : +86 13265023130