IC698CPE020-JX specifications

Type: Programmable Logic Controller (PLC).

Central processing unit (CPU) speed: 700 MHz Pentium III floating-point microprocessor.

Memory: With a 10 Mbytes battery, it supports user memory and 10 Mbytes of non-volatile memory.

Input/Output (I/O) Module: Supports different types of I/O modules to meet various application requirements.

Communication capability: Communicate with other rack modules through standard VME backplanes.

Overview:

IC698CPE020-JX is part of the PACSystems RX7i series, capable of real-time control of machines and communication with other rack modules through a standard VME backplane.

It is equipped with a 700MHz Pentium III floating-point microprocessor with a standard execution speed of 0.14 milliseconds per 1000 Boolean contacts.

Memory:

IC698CPE020-JX provides 10 Mbps volatile memory (RAM) and 10 Mbps flash memory (NVRAM) for storing user data, programming configurations, symbolic variables, and register related information.

CMOS batteries are required to support volatile memory.

Interface and Communication:

IC698CPE020-JX has three serial ports and two Ethernet ports.

For Ethernet connections, it supports TCP/IP configuration and requires Category 5 shielded or unshielded RJ-45 twisted pair.

The supported serial ports include RS-232 and RS-485.

Application:

The IC698CPE020-JX module is widely used in the field of industrial automation, including manufacturing, energy and power, chemical and other industries.

It provides the necessary power supply for the PLC system to support control and monitoring of various equipment and processes.

Performance characteristics:

IC698CPE020-JX has powerful processing capabilities and can handle complex control logic and data processing tasks.

Supports multiple communication interfaces, such as Ethernet and serial communication, for data exchange and communication with other devices and systems.

Installation and configuration:

During installation, it is necessary to record the MAC address of the device, turn off the rack power, insert IC698CPE020-JX into rack slot 1, and restore rack power.

To update the firmware, simply connect IC698CPE020-JX to the computer using the appropriate serial port and run the update software.

Mail :elora16811@gmail.com
Phone/Wechat/Whatsapp : +86 13265023130